3 Methods To Boot Windows 10 In Safe Mode

While Windows is a well known and highly versatile operating system, sometimes problems are encountered. For that, the Safe Mode needs to be booted to troubleshoot any complexities that are being faced. Safe Mode is a diagnostic software mode in the Windows Operating System that enables users of Windows to access an altered version of Windows that has limited access allowing only essential programs to run when boot. It does not load things that will make a Windows crash.

Windows 10 Safe Mode

How to boot in Safe Mode Windows 10?

If you are wondering how to boot in Safe Mode Windows 10 you can follow the series of methods given below:

1. How to boot in Safe Mode Windows 10 using “Shift+Restart”?

  • If you face a problem while signing in to your device, use this method to boot into the Safe Mode
  • Press and hold the “Shift” key while keeping it pressed to go to the menu on the lower right corner and click “Restart.”

    Shift and Restart in Windows
  •  The system will restart, and a screen appears with different options. Choose Troubleshoot
  • A screen then opens, select advanced options
  • On the Advanced options screen, there may be two options either one reading choose Startup Settings or “See more recovery options.”
  • Then select the Startup Settings option and enable the Safe Mode by pressing the Restart button
  • After the Windows restart you can choose to allow what version of Safe Mode you desire such as Standard Safe Mode (press the 4), Safe Mode with Networking (press the 5), Safe Mode with Command Prompt (press the 6)
  • Then log into the Windows Safe Mode using an account that has administrator permissions and perform the necessary changes required for the normal functioning of the operating system

Bonus Windows 10 Posts:
1. How to Take A Screenshot on Windows 10
2. How to Factory Reset Windows 10
3. 20 Best MP3 Media Players for Windows
4. Top 20 Screen Recording Software for Windows
5. Top 10 Browsers for Windows
6. WhatsApp Download for PC Windows 7/8/10

2. How to boot in Safe Mode Windows 10 using the installation drive and the Command Prompt

How to boot in Safe Mode Windows 10 is pretty simple, and a quick procedure with the help of the Command Prompt keep the following steps in mind:

  •  With the help of a setup DVD or a USB Memory stick, you can boot your Windows into Safe Mode.  
  •  Load the installation environment, choose your preferred language and click Next
  •  After clicking Next, select the link that reads “Repair your computer” will be displayed on the bottom left corner
  • Choose the Troubleshoot option next
  •  On reaching the Advanced options screen, choose Command Prompt
  • Inside the Command Prompt Window, type the command bcdedit /set {default} safe boot minimal, then press the enter key
  •  Later the message is displayed saying that the operation has been carried out successfully
  •  Close the command prompt and click on continue  
  •  The PC then reboots into the Safe Mode. You can then carry forward with the services you desire.  

How to boot in Safe Mode Windows 10 using the setting app

  •  After logging into Windows 10, you can boot into Safe Mode using Settings Application found in the Start Menu.
  •  Open Settings (Windows 10)
  •  Go to the Update and Security section
  •  On the left side, you will find a Recovery button, press it.  
  •  The Advanced startup section will open
  •  Click on Restart
  •  Then choose the troubleshoot option
  •  Then follow the steps mentioned in the above method
  •  Click Restart
  •  And choose which version of Safe Mode you desire

These are the steps that must be followed for how to boot in Safe Mode Windows 10 using the settings application.

How to boot in Safe Mode Windows 10 using a USB flash recovery drive

  •  Once you have created a recovery drive, it will ask you to boot to Windows 10.
  •  The first screen asks you to choose your desired keyboard 
  • Then continue to the next screen and click on Troubleshoot
  •  The series then follows, go to the advanced options screen select Startup settings
  •  Then restart
  •  The PC will reboot your system to the Safe Mode this answers the query of how to boot in Safe Mode Windows 10 using a USB flash recovery drive

How to boot in Safe Mode Windows 10 by interrupting the normal boot

If the system fails to boot more than thrice, then the fourth time, you will see by default enter in an Automatic Repair mode. This Mode will help you boot to the Safe Mode. To enter into the Automatic Repair mode, you are required to interrupt the normal booting process.  

  •  Use the reset or Power button to stop the boot before it loads onto Windows 10.  
  •  Keep the power button pressed for a minimum of four seconds to force power off the device.  
  •  Upon entering the Automatic Repair mode, a screen is displayed, which reads “Preparing Automatic Repair.”
  •  You are then asked to choose an account to continue
  •  Windows 10 then automatically makes a diagnosis of your system
  •  When the screen is loaded, press the Advanced options button.
  •  Click troubleshoots after that step.
  •  Then click on Advanced options > Startup Settings > Restart.
  • Windows 10 is then booted into Safe Mode, and you can carry forward with your desired operations.

How to exit the Safe Mode?

Once you are done in solving what problem had occurred, and you would like to go back to the Normal Mode, then follow the following steps.

  •  Open the Systems configuration tool using the run command.
  •  You can either use the Windows key R or by typing MSConfig, then click ok.
  •  The boot screen opens then you will have to uncheck the Safe boot box and then click on the apply button.

Your system is then rebooted into the normal Mode.

Now that you have learned how to the many ways in which Safe Mode can be booted, it is crucial to see to it that you seek the knowledge of when it is required to use this and what Mode of operation is more convenient to the user. Safe Mode helps troubleshoot all the problems the operating system faces and helps with the regular functioning of the operating system after the problem is fixed. I hope these instructions are clear and help you understand all about the Safe Mode in Windows 10.
Please share this article with your family and friends to help them understand what Safe Mode is and the different methods to boot Safe Mode Windows 10.

What is Safe Mode in Windows 10?

Safe Mode is intended to solve most of the problems that your Windows 10 operating system is facing. It allows you to troubleshoot Windows and determine what factor is responsible for the abnormal functioning of specific tasks. Once the problem is rectified, the user can reboot for regular operation.

Difference between Normal Mode and Safe Mode?

Normal Mode is the default operating mode for Windows, whereas, the Safe Mode is the diagnostic Mode for troubleshooting the problems. Any additional features are not loaded on the Safe Mode. 

How to know if you have entered into the Safe Mode?

Once you have entered into the Safe Mode, the words “Safe mode” appears on the four corners of your screen.

Share this article:

About Thomas Androws

Thomas Androws is the founder of waftr.com, He loves to Blog, share his Computer knowledge, making money online, and helping Computer newbies.

View all posts by Thomas Androws →

Leave a Reply

Your email address will not be published. Required fields are marked *